cisco 300-625 practice test

configuring cisco mds 9000 series switches (dcsan)

Last exam update: Jan 14 ,2025
Page 1 out of 2. Viewing questions 1-10 out of 20

Question 1

DRAG DROP Drag and drop the DCNM configuration tasks from the left onto the correct tools on the right.
Select and Place:

Mark Question:
Answer:

Discussions
0 / 1000

Question 2

A storage engineer is troubleshooting a Cisco MDS switch upgrade issue. What prevents the completion of a non-disruptive upgrade?

  • A. The Fibre Channel host initiator is connected.
  • B. The Fibre Channel storage target is connected.
  • C. The Cisco Fabric Services operation in progress.
  • D. The Fibre Channel and FCoE storage targets are connected.
Mark Question:
Answer:

b


Reference:
https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_3_x/release/notes/14116.16.html

User Votes:
A
50%
B
50%
C
50%
D
50%
Discussions
vote your answer:
A
B
C
D
0 / 1000

Question 3

Which configuration is available only in Cisco DCNM-SAN Advanced mode?

  • A. IVR
  • B. VMpath configuration
  • C. zoning
  • D. template-based provisioning
Mark Question:
Answer:

a

User Votes:
A
50%
B
50%
C
50%
D
50%
Discussions
vote your answer:
A
B
C
D
0 / 1000

Question 4

Refer to the exhibit.

Which configuration change improves the ability of the link to recover from frame loss?

  • A. Increase the reset timeout.
  • B. Enable selective acknowledgment.
  • C. Increase the send buffer size to 15000 KB.
  • D. Disable PMTU discovery.
Mark Question:
Answer:

b

User Votes:
A
50%
B
50%
C
50%
D
50%
Discussions
vote your answer:
A
B
C
D
0 / 1000

Question 5

Which condition requires using a device alias rather than a Fibre Channel alias?

  • A. The zone database must be distributed over the fabric.
  • B. The same alias must be used in zoning as well as DPVM.
  • C. All aliases being used are being configured in the same VSAN.
  • D. Aliases must be saved within a central database on the fabric.
Mark Question:
Answer:

a

User Votes:
A
50%
B
50%
C
50%
D
50%
Discussions
vote your answer:
A
B
C
D
0 / 1000

Question 6

Which Cisco NX-OS command displays the VSAN that is associated with each FCID?

  • A. show fcdomain
  • B. show fc2 plogi
  • C. show vsan database
  • D. show flogi database
Mark Question:
Answer:

a

User Votes:
A
50%
B
50%
C
50%
D
50%
Discussions
vote your answer:
A
B
C
D
0 / 1000

Question 7

Refer to the exhibit.

A port channel has been configured between a Cisco MDS and a Cisco Fabric Interconnect switch. Which interface(s) in the port channel carry the control plane traffic?

  • A. per packet, balanced between interfaces fc1/9 and fc1/10
  • B. from interface fc1/9
  • C. from interface fc1/10
  • D. per flow, balanced between interfaces fc1/9 and fc1/10
Mark Question:
Answer:

d

User Votes:
A
50%
B
50%
C
50%
D
50%
Discussions
vote your answer:
A
B
C
D
0 / 1000

Question 8

Which result occurs if a device alias is renamed and then the original device alias name is used in an add command in the same session?

  • A. Both commands execute successfully.
  • B. The device alias is renamed and the add command is moved to the rejected list.
  • C. Both commands are moved to the rejected list.
  • D. The rename command is moved to the rejected list and the add command executes successfully.
Mark Question:
Answer:

a

User Votes:
A
50%
B
50%
C
50%
D
50%
Discussions
vote your answer:
A
B
C
D
0 / 1000

Question 9

Which component is initially responsible for loading the kickstart image on Cisco MDS Switches?

  • A. ROMMON
  • B. BIOS
  • C. NX-OS
  • D. BASH
Mark Question:
Answer:

c

User Votes:
A
50%
B
50%
C
50%
D
50%
Discussions
vote your answer:
A
B
C
D
0 / 1000

Question 10

Which command identifies the application and the user that have a Cisco Fabric Services session open?

  • A. show cfs application
  • B. show zoneset active
  • C. show cfs lock
  • D. show device-alias database
Mark Question:
Answer:

a

User Votes:
A
50%
B
50%
C
50%
D
50%
Discussions
vote your answer:
A
B
C
D
0 / 1000
To page 2